Ultra-Lath® Plastic Lath can be used for exterior or interior vertical applications only for non-rated assemblies. It’s easy to handle and cuts with a utility knife. It’s lightweight and non-rusting.

The 1/8″ self-furring ridges provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals found in Portland-based stucco. It may be installed over any code-approved substrate. It cannot be used in horizontal soffit applications. Plastic Ultra Lath can be used to reinforce a heated floor.

Note: The Ultra Lath Plus, 27″ x 75′ x 1/4″ is yellow and the 27″ x 100’x 1/8″ is gray.

Specification

ULTRA-LATH® shall be Plastic Components Inc. It shall be used where specified by the architect and installed per industry standards ASTM C1063 and ICC-ES Report #94182.

Contact us for more information on PVC Accessories by Plastic Components.