Plasti-Grip® PMF anchors rigid continuous insulation to concrete and masonry substrates. Available in multiple lengths for foam thicknesses of 1/2″ – 5″ Pre-drill the hole with the 5/16″ masonry bit, then tap flush with a hammer. The PMF Anchor, 2-1/4″ diameter head, sits flush on insulation.
It is used for fastening EPS foam in PB EIFS systems, rigid foam insulation, and waterproofing drainage fabric for concrete or masonry block applications.
Plasti-Grip® PMF Anchor Features
- Round 2-1/4″ diameter taper plate
- No pins, screws, or adhesives required
- Simple to install:Â Pre-drill and hammer flush
- Pre-drill the hole with a 5/16″ masonry bit
- Solid plastic design reduces thermal bridging through the insulation
- Made in the USA
| PMF Fastener Size | Insulation Thickness | Quantity Per Carton |
| 2″ PMF | 1/2″ – 3/4″ | 250 pcs. |
| 2-3/4″ PMF | 1″ – 1-1/2″ | 250 pcs. |
| 3-1/2″ PMF | 1-1/2″ – 2″ | 250 pcs. |
| 4-1/2″ PMF | 2-1/2″ – 3″ | 250 pcs. |
| 5-3/8″ PMF | 3-1/2″ – 4″ | 200 pcs. |
Contact us for more information.