The FD2CT Series recessed flange and door fire-rated access door is a 2-hour insulated, fire-rated access door designed to accept a tile, plaster, or drywall insert into a recessed door, with a recessed frame for a trimless appearance that matches the surrounding walls. There are various flange options available, including trimless, drywall bead, or plaster flange

The access doors in this series may be installed in walls or ceilings where control of temperature rise and heat transmission is required.

FD2CT Series Access Door Specifications

• Materials: Satin-finish galvannealed steel or 304 stainless steel.
• Frame: 16 ga steel. Depth: 2-7/8″.
• Flange: The concealed flange is recessed 5/8″ to allow wallboard installation on top. It is 1-1/4″ wide.
• Door Panel: 18 ga. Liner: 22 ga. The face of the door is recessed 5/8″ to accept a tile or wallboard insert.
• Insulation: The door panel contains 1-1/2″ of high-temperature insulation.
• Finishes: Rust-inhibitive off-white primer coat or 2 B mill-finish stainless steel.
• Hinges: The continuous piano hinge allows the door panel to open 175° for easy access. Unless otherwise requested, the hinge is placed on the long side of the door (“H” dimension).
• Panel Closer: The automatic panel closer will close and latch the door from an open position of approximately 90° as required by NFPA 80.
• Latch: The standard factory-installed latch is a flush-mount 1/4″ allen key. All fire-rated locks are self-latching and include an interior latch release mechanism to open the doors from the inside. The interior latch release is standard on doors, including and exceeding 16″ x 16″. A latch release for smaller sizes is optional.
• Sizes: Minimum size 12″ x 12″, maximum size 24″ x 36″.

OTHER SIZES AVAILABLE – Please Order By Rough Opening Size and Specify Wall or Ceiling Application

Contact us for more information on custom sizes and additional locking details.