The FD2CT Series Access Door is a 2-hour insulated, fire-rated access door designed to accept tile or a drywall insert into a recessed door, and along with the recessed frame for a trimless appearance to match the surrounding walls.
The access doors in this series may be installed in walls or ceilings where control of temperature rise and heat transmission is required.
FD2CT Series Access Door Specifications
- Materials:Â Satin finish galvannealed steel or 304 stainless steel.
- Frame: 16 ga steel. Depth 2-7/8″.
- Flange: Concealed flange is recessed 5/8″ to allow for wallboard installation on top. Flange is 1-1/4″ wide.
- Door Panel: 18 ga. Liner-22 ga. Face of door is recess 5/8″ to accept tile or wallboard insert.
- Insulation:Â the door panel contains 1-1/2″ of high temperature insulation.
- Finishes: Rust-inhibitive off-white prime coat or 2b mill finish stainless steel.
- Hinges: The continuous piano hinge allows the door panel to open 175° for easy access. The hinge is placed on the long side of the door (“H” dimension) unless otherwise requested.
- Panel Closer: The automatic panel closer will close and latch the door from an open position of approximately 90° as required by NFPA 80.
- Latch: The standard factory installed latch is a flush mount 1/4″ allen key. All fire-rated locks are self-latching and include an interior latch release mechanism allowing the doors to be opened from the inside. The interior latch release is standard on doors including and exceeding 16″ x 16″. Latch release for smaller sizes is options.
- Sizes: Minimum size 12″ x 12″, maximum size 24″ x 36″.
FD2CT Series Access Door STANDARD SIZES |
|||
---|---|---|---|
Rough Opening (W x H) | # of Latches | ||
12″ x 12″ | 1 | ||
16″ x 16″ |
1 |
||
18″ x 24″ |
1 |
||
22″ x 30″ |
1 |
||
24″ x 24″ |
1 |
||
24″ x 30″ |
1 |
||
24″ x 36″ |
1 |
OTHER SIZES AVAILABLE – Please Order By Rough Opening Size and Specify Wall or Ceiling Application
Contact us for more information on custom sizes and additional locking information.