FD2 Series Insulated Fire Rated Access Door | Wall | Ceiling Access Door

FD2 Series is an oversize two-hour fire-rated single-leaf panel.  These access doors are the largest net sizes available for a fire-rated access door for use in a wall or ceiling application. These doors are ideal when installation or removal of equipment is a consideration.

• Material: Satin finish galvanized steel or 304 stainless steel
• Frame: 16 ga galvanized steel up to and including 30" x 48" or 14 ga steel for larger sizes. Depth 2-1/4"
• Flange: Width-7/8" up to and including 30" x 36" or 1-1/4" for larger sizes
• Door Panel: 18 ga galvanized steel with 22 ga liner
• Insulation: The door panel contains 1-1/2" of high temperature insulation material.
• Finishes: Rust inhibitive off-white prime coat or #4 stainless steel finish on exterior surface
• Hinges: The concealed continuous rod hinge is designed to secure the door panel.  The hinge is placed on the long side of the door (" H" Dimension) unless otherwise requested.  Note: Sizes greater than 48" in a wall position, a continuous piano hinge is standard.
• Panel Closer: The automatic panel closer will close and latch the door from an open position of approximately 90° as required by NFPA 80.
• Latch: The standard factory installed latch is a flush mount 1/4" allen key.    All fire-rated doors are self-latching and include an interior latch release mechanism allowing the door to be open from the inside for sizes 16" x 16" and larger. Interior latch for smaller sizes is available as an option.

FD2 Series STANDARD SIZES
Rough Opening W x H	# of Latches
Single Leaf Construction For Walls Only
36" x 60"	2
40" x 60"	2
48" x 60"	2
Single Leaf Construction for Ceilings Only
24" x 48"	2
30" x 30"	1
30" x 36"	2
30" x 48"	2
32" x 32"	2
36" x 36"	2