Rasp Weighs just 5.3 Lbs.
Requires 6 CFM @ 75 PSI
Each EIFS Air Rasp tool comes with one sheet 8" x 18", 16-grit Rasp Paper #ARP818
Note: Air fittings not included
ORBITAL ACTION Contractors model KITAE818 Air Rasp for rasping and leveling EIFS foam walls. Dynamically balanced 8" x 18" aircraft aluminum pad supported by a 5-point Suspension generates 144 square inches of a full contact EIFS Rasp. Special-outriggers eliminate vibration. Powered by an Air-Efficient Motor.
Wt 5lbs 9oz
Air Consumption 11.4 cfm @ 90psi
Noise Level: 84 dBa
It is necessary to rasp the entire expanded polystyrene (EPS) surface before EIFS base coat application. Completely removing the existing surface by rasping, removes any surface contaminants and the newly opened surface improves overall adhesion. Once complete it is necessary to remove any loose EPS material that remains on the wall surface and the floor of the application area.
Rasping an EIFS EPS foam wall may be done with any of our DuraRasp™ Rasp hand held rasping tools or by attaching self-adhering our abrasive rasp paper to a standard rasp tool. Our 4 foot DuraRasp™ Rasp can sometimes be a more efficient method as it addresses more surface area and assists in substrate flatness.
View all of our manufacturers ...