Acudor RHA Aluminum Equipment Roof Hatches are designed to provide convenient, economical, watertight access to a building’s roof where more extensive access is required. The larger opening lets you install or remove equipment through the roof. These hatches are designed with safety, durability, and ease of operation.

RHA Aluminum Roof Hatches Features

• Stainless Steel Hardware is standard on all hatches
• 1″ Polyiso (R-6) insulation standard on all hatches
• EPDM foam weather/draft seal gaskets provide weather-tight construction
• Supports 40lbs./sq. ft. live load

RHA Aluminum Roof Hatches Specifications

• Cover: Double-skin construction  (“in-box type design”) with 1″ Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of the cover to provide a flush, tight fit and is designed to support a live load of 40 pounds/sq. The cover is 1/8″ thick aluminum with a 20-gauge aluminum inside the liner.
• Curb: The curb is 1/8″ thick aluminum with 1″ Polyiso (R-6) insulation at the exterior. It is 12″ high, with a 3.375″ wide bottom flange and pre-drilled mounting holes.
• Hinge: Heavy-duty aluminum pintle hinges with a 3/8″ stainless steel pin
• Opening: Gas spring operators allow the cover to open and close easily. Stainless Steel inside pull handle allows for easy control when closing the cover.
• Door Latch: Self-latching, with an outside T-handle and a stainless steel inside lock and lever assembly. The unit also has inside and outside padlock provisions.
• Finish: Mill Finish

RHA Aluminum Roof Hatches Options

• Painted and Anodized finishes
• Polycarbonate domes for daylighting
• Louvered Curbs
• Curb Mounted Units
• Curb pitch corrected for sloped roof
• Higher curb heights for green roof applications

Door Size (W x H)Product Code

Contact us for more information on custom sizes and additional locking details.