i-DRIP TRAC® is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above the windows and doors or as a Starter TRAC. The return face flange is 1″ (25 mm) wide, with striations that provide a strong physical bond for the base coat to the return flange. A double row of holes allows for a positive bond of the base to the substrate. Weep holes are set at 4″ (100 mm) on center.
Plastic Components manufactures the most complete selection of PVC trims and accessories for EIFS. These PVC trims deliver proven remedies for rustproofing your installation, lowering installed costs, controlling moisture, and improving job quality.
Excellent paint adhesion. Meets ASTM standards D1784, C1063, and D4216.
Specification
The Window/Door DRIP TRAC shall be Plastic Components, Inc. #__________. All exterior accessories shall conform to ASTM standards D1784, C1063, and D4216-99. They shall be used where specified by the architect and installed per industry standards.
Contact us for more information on PVC Accessories by Plastic Components.