EIFS and Drywall Tools designed to assist in saving time and labor.
Dissolve and remove uncured polyurethane foam from inside and outside of foam dispensing gun
Graffiti Remover is used to used to remove graffiti from smooth masonry ,wood or metal.
Pro-Lok 42 spray adhesive used to adhere to rigid foam, wood, stone, gypsum board, glass, mosaic, brick, cement board and more.
Pro Lok 42 spray adhesive used to adhere to rigid foam and is fire rated to fill, seal and bond construction applications.
Pro-Lok 42 spray adhesive used to adhere to construction and decorative application, and is easy to use.
Pro-Lok 42 spray adhesive used to adhere to wood, stone, gypsum board, glass, mosaic brick, cement board, and EOS foam panes and has a high insulation value.
Pro-Klean is an acetone based cleaner used to clean spray foam gun nozzles.
Blue sticky floor mats with adhesive peel off layers to trap dirt from shoes and equipment wheels, and then peel off the layer to the next clean layer.
ci-lcok fasteners is the specified fastners to us with various continuous insulated wall systems and will flatten out when in application.
G-2 hot knife groove sled is a 6in wide, adjustable blade holder designed to assist with keeping consisten depth when cutting foam.
The unique plastic fastener, ULP-302, design allows plate to flatten out once attached, with large ribs to stiffen plate, limiting deflection.
ULP-402 fastener plates to attache Lath and stucco netting will stiffen when applied to limit defection.
Remove uncured foam from foam dispensing gun with Dow Great StuffPro Foam cleaner. Allows you to clean your foam dispensing gun inside and out.
The Wind-Lock G2 Hot Knife allows you to accurately cut EIFS, ICF, SIP, EPS, and XPS foam.
G2 Hot Knife ICF Kit ideal for ICF builders, contractors and electricians for versatile cuts for conduit channels and electrical box access.
View all of our manufacturers ...