An elastomeric sealant to use when caulking butt joints, intersections, ends and corners in projects using Plastic Components' PVC accessories.
Lath designed to use with traditional stucco and can also be used as a mortar base.
The INBOX is a low profile recessed electrical box with a fixed flange for installation into plaster and stucco applications.
Plastic Components model 300 Continuous Soffit Vent is used when 3/8-inch, 10mm sheathing is used; excellent painting adhesion.
EIFS V-control joint is used to relieve stress from expansion and contraction within the wall.
Foundation Weep Screed 632 dimension can be installed at the plate line or stem wall to provide a stucco stop.
Z-Trim for 5/8" T1-11 siding.
Floor Line Z-Flashing for floor line joints or gable applications.
Transitional Floor Line Bead, Item 1623, is for the 5/8-inch board to protect the bottom board edge from moisture.
Plastic Component's Ultra Corner, model 211, is a flexible drywall trim that is only 1/16-inch thick for installation where angled corners meet in ceilings and walls.
Surface Mounted expansion joint for 3/8" EIFS finish.
Ultra Lath Plastic Sheets are 1/8 inch and self ferring. They are 27 inchs x 96 inches. 10 sheets per bundle. 25 bundles per pallet.
Self Furred plastic Ultra Lath Plus (yellow) made by Plastic Components has 1/4" ridges for exceptional keying. This is the waterproof heavy duty alternate to metal lath.
Plastic Components, model 222P, is a 10-foot long concrete drip edge that creates a 1/2-inch drip edge in concrete forming.
Plastic Components, model 230-50, is an inside corner PVC trim piece used in lamination of vinyl wall covering.