EIFS washers and fasteners use plates and pronged washers to attach lath and stucco.
The Universal Depth Stop is used to set EIFS washers to a consistant uniform depth.
The Rodenhouse Grip Plate Lath and Tab Washer are 1-1/4" diameter and are used with screws or pins for lath attachment and plaster repair.
The Rodenhouse Plastic Grip Prong Washer is a 2" pronged plastic washer used with PB EIFS wall syatems.
Assembled PBH washer and screw used to fasten foam sheathing boards onto steel studs. Available in various lengths.
Pre-Assembled PBH EIFS washer and Tapcon Masonry screw are used on concrete and masonry applications.
PBH Washers used for PB (Polymer-Based) EIFS Wall Systems with large keying holes to assure excellent bonding.
Pre-Assembled PBH washer and Wood Lite-Metal Pre-Assembled Fasteners have a Climacoat protection for exterior applications on EIFS walls or decks.
The DP 300 is an all purpose PM EIFS Mechanical Washer to be used with foam insulation board.
DP-300 Pre-Assembled EIFS Washer and Steel Screw have a Climacoat protection for exterior installation.
DP-300 Pre-Assembled EIFS Washer and Wood Screw designed for use in securing fiberglass mesh, wire mesh or expanded lath over foam insulation boards.
An EIFS washer that creates a strong mechanical bond to base coat and will sit flush to low-profile to the stucco application.
The DP-500 is a metal Lath Washer with tabs and can be screwed or nailed on many different substrates.
The DP-525 is a metal washer used to repair, stabilize, and re-support sagging lamina or old plaster.
Wall Tac fasteners are 1/4 inch in diameter used for anchoring into masonry.
Tapcon concrete screws can be used in concrete, brick or block material and have excellent holding values.
View all of our manufacturers ...
