Connect & follow Learn more about Access Doors and Fire Extinguisher Cabinets on our Blog Connect with on our Facebook Page



Your Cart

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Our products

Top Section Deleted
1 of 3 Enlarge
Manufacturer Demand Products
SKU: SideWinder

SideWinder Ornamental Hot Wire Foam Shape Cutter

SideWinder 4 ft Hot Wire Foam Shape Cutter

  • Hot Wire Foam Shape Cutter
  • Hot Wire Cuts Foam Compound Miters, Straight Cuts, Columns, and Decorative Moldings
  • Uses Your Hardboard Template Patterns To Trace Shapes
  • Cuts Angles and Straight Cuts
  • Variable Heat Control; Heats Up Hot Wire Extremely Fast
  • 110 Volts Magnum Power Controller. Available in 220 Volts
  • 2-Foot-Square EPS Block Table Capacity
  • Perfect for Cutting EPS Foam for EIFS, Theatrical Prop, Architectural Shapes, Concrete Mold Designs
  • 33" x 62" Wide Table Size
  • Weighs Just 125 Pounds
  • Hot Wire Cuts 48" Wide EPS Foam

Note: Heated Wire expands when hot. If the spring is too tight the wire may break restricting operation of mechanism. If too loose, the cut will be sloppy. Readjustment of tension may be necessary from time to time.

Safety Tips

Power Controller – Use nothing longer than a 50 foot 12/3 grounded extension cord. Set the temperature dial on the controller to zero (0). Turn on the hot wire power controller and adjust the dial until the wire glows orange. Immediately back off the controller until the heated wire just begins to turn from orange to gray. This is the optimum foam cutting temperature of the wire. Anything hotter will cause premature wire failure or anything cooler will require too much feed pressure on the wire causing premature failure. If the wire is too hot, the cut may not be as accurate as you would like. A wire that is too hot will melt the foam too quickly at the beginning of the cut and less quickly as the wire cools off resulting in an inaccurate cut.

  • Use only the recommended wire. (Ni-Chrome 100)
  • Do not use this equipment in wet or damp conditions.
  • Use only grounded receptacles.

Email Us for More Information and Available Pricing


Product Reviews

No Reviews For This Product.

Click to review this product