Metacaulk® Firestop Products fill voids in and around construction joints and cables to prevent the spread of fire, heat, gas, and smoke.
The Metacaulk 1000 is a water-based intumescent caulk fire-rated sealant for construction joints to prevent the spread of fire, smoke, and hot gases through walls and ceilings.
A water-based paintable intumescent fire rated sealant and smoke seal available for construction joints and through penetration openings that will prevent the spread of flames, smoke, hot gases, and water.
Metacaulk 350i is a water-based intumescent firestop sealant that can be applied with a caulking gun, bulk loading gun, troweled or pumped to seal construction joints and through penetrations.
The Metacaulk 1200 is a water based general purpose firetop that is self leveling and non sag. It can be caulked , brushed, pumped or poured.
The Metacaulk Joint Strip is a flexible intumescent product used to prevent the passage of flames, smoke and hot gases between control joints in concrete and masonry applications.
The Metacaulk Wrap Strips are a flexible intumescent product used primarily for plastic and insulated pipes and forms a hard char to seal off the opening by preventing flames and hot gases to spread.
The Metacaulk Intumescent Pipe Collars are a prefabricated assembly used for nonmetallic piping to in through penetrations. A required item in Radon mitigation. Available in 5 sizes.
The Metacaulk Cover Guard is a single component pre-made intumescent gasket that is installed when the cover plates are, providing fire protection. Made for both receptacles and switches.
The Metacaulk Box Guard is easy to use as a fire-rated pad that is placed in the back of electrical boxes for fire stop applications. A faster and less expensive alternative to putty pads.
The Metacaulk Fire Rated Putty Stick is a moldable intumescent putty rated for up to 3-hours for preventing the spread of flames, smoke, gas, and water through openings in walls and ceilings.
The Metacaulk Putty Pads are easily moldable onto electrical boxes or conduits which will expand when exposed to heat preventing the spread of flames, smoke, gas, and water through openings.
The Metacaulk Firestop Pillows are used for large openings for cables, and cable trays to help prevent the spread of fire and hot gasses. Ready to Install.
Metacaulk's Composite Sheet is a 36"x36" rigid fire resistive panel that was designed for larger openings to restore the fire rating in floors, walls or ceilings.
Rectorseal RS-136 is an interior, residential fire block, and smoke seal caulk to be used on electrical, plumbing, plastic pipe, and phone communications systems penetrations.
Metacaulk Universal Restraining Collars may be used with concrete, wood, or gypsum.
View all of our manufacturers ...