Demand Products include hot knives, rasps, fasteners, adhesives and coatings for the EIFS and Stucco industry.
Dissolve and remove uncured polyurethane foam from inside and outside of foam dispensing gun
Graffiti Remover is used to used to remove graffiti from smooth masonry ,wood or metal.
Pro-Lok 42 spray adhesive used to adhere to rigid foam, wood, stone, gypsum board, glass, mosaic, brick, cement board and more.
Pro Lok 42 spray adhesive used to adhere to rigid foam and is fire rated to fill, seal and bond construction applications.
Pro-Lok 42 spray adhesive used to adhere to construction and decorative application, and is easy to use.
Pro-Lok 42 spray adhesive used to adhere to wood, stone, gypsum board, glass, mosaic brick, cement board, and EOS foam panes and has a high insulation value.
Pro-Klean is an acetone based cleaner used to clean spray foam gun nozzles.
The Carve360 is a cordless foam cutting hot knife with a long-lasting battery to cut a variety of foam material.
The Cut Rite hot knife is a polystyrene foam cutter that cuts foam clean and leaves no dust.
Groove Jet 400 is a hot knife used for cutting aesthetic grooves and heats up very quickly.
The Universal Depth Stop is used to set EIFS washers to a consistant uniform depth.
The Groove Jet 400 kit is a hot knife used to cut aesthetic grooves and will cut the foam all the way to the inside corners.
The Carve360 EIFS Starter kit is a cordless hot kife which includes a carrying case, 2 rechargeable batteries, blades, wire, and an adapter.
The Hot Knife CR Pro Kit offers a 150 Watts of cutting power with a hot knife foam cutter with a spring loaded safety trigger. The kit also includes a groove adapter, blades, NWFW Wire, crimping pliers and more.
Bend and cut flat Ni-chrome wire with this crimping plier.
View all of our manufacturers ...